MX-2 - ultragarsinis storio matuoklis

• Weight: 10 ounces
• Size: 2.5 W x 4.75 H x 1.25 D inches
  63.5 W x 120.7 H x 31.8 D mm
• Operating Temperature: -20 to 120F (-20 to 50C)
• Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

Keypad

• Sealed membrane that is resistant to both water and petroleum products.
• Five tactile-feedback keys.

Transducer

• Dual element (transmit and receive)
• 1 to 10 MHz frequency range.
• Locking quick disconnect Lemo connectors
• 4 foot cable
• Custom transducers available for special applications

• Two 1.5V alkaline or 1.2V NiCad AA cells.
• Typically operates for 200 hours on alkaline and 130 hours on NiCad.

Display

• Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
• Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
• Bar graph indicates stability or reading.

Software

• Comes complete with cable and software to transfer the velocity to the gauge.

Certification

• Factory calibration traceable to national standards.

Warranty

• 5 year limited.

• Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
• Switch to select English or metric units.
• Resolution: 0.001 inch (0.01 millimeter)
• Velocity Range: .0492 to .3937 in/m s
  1250 to 10,000 meters/sec
• Built-in: Stainless steel reference disk for probe zeroing.
• Four readings per second for single point measurements or 16 per second in SCAN mode.
• Velocity Settings: The MX-2 has 8 set velocities and 2 that are custom to the user’s applications. The set velocities are as follows:
• 1. Steel 4340 (.233)
  2. Stainless Steel 303 (.223 )
  3. Aluminum 2024 (.251 )
  4. Cast Iron (.179 )
  5. Plexiglass (.106 )
  6. PVC (.094)
  7. Polystyrene (.092)
  8. Polyurethane (.070 )
  9. Custom
  10. Custom