Additel 680 - skaitmeninis slėgio manometras

Pressure ranges to 40,000 psi (2,800 bar)
0.05%FS, 0.1%FS or 0.25%FS accuracy
Fully temperature compensated accuracy
Data logging and wireless (Optional model)

With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the 680 series digital pressure gauges provide an accurate, reliable, and economic solution for a wide range of pressure applications. They are loaded with functionality and remarkably easy to use. To reach the best performance, every silicon pressure sensor in our gauges is specially aged, tested and screened before assembly. With data logging and wireless features, the 680W gauge can store pressure measurement data in the internal memory or display them on PC through wireless communication.

Dokumentacija
- Additel 680 Datasheet in English(PDF)
- Additel 680 Manual in English(PDF)

• Pressure ranges to 40,000 psi (2,800 bar)

• 0.05%FS, 0.1%FS or 0.25% full scale accuracy

• Fully temperature compensated accuracy from14°F to 122°F (-10°C to 50°C)

• Up to 13 selectable pressure units, 6 customized definition engineering units

• Large, easy to read display with 5-digit resolution

• Backlit display

• Icon-based menu

• Display flash warning when pressure exceeds 120% of FS

• Stainless wetted surface construction

• IP67 (submersible in 1 meter of water)

• Drop-tested from 1 meter

• 2 AA alkaline batteries

• CE RTTE, FCC ID, IC ID Certificates

• NIST traceable calibration with data(included)

Specification

• Model
ADT680: Regular version
ADT680W: Data logging and wireless version

• Pressure Type: Gauge and Compound

• Performance
Accuracy: 0.05%FS, 0.1%FS or 0.25%FS
Update Rate: 10 times/Sec ,3 times /Sec (default), 1 time /Sec ,1 time/15 Seconds
Operating Temperate: 14°F to 122°F (-10°C to 50°C)
Compensated Temperate: 14°F to 122°F (-10°C to 50°C), accuracy Guaranteed
Storage Temperature: -4°F to 158°F (-20°C to 70°C)
Overload Pressure: 1.2X

• Power Supply
Battery: 2 x AA alkaline (LR6) batteries
Recommend: Duracell MX1500, EnergizerE91, Panasonic LR6, Duracell 15AU
Battery life:
10/Sec:1500Hours; 3/Sec: 3,000Hours;
1/Sec: 6000Hours; 1/15Sec: 12,000Hours
Rated Power: 3.0VDC Imax=30mA Pmax=90mW

• Material
Wetted Surface: All wetted surfaces are 316L Stainless Steel with welded design for gauges <10,000 psi (no O-ring, thread tape, epoxy, or sealant on any part of the sensor assembly), and copper O-ring design for gauges > 10,000 psi.
Case: PC+ABS ,
Protective Cover: Silicone Rubber

• Display
LCD Specification: FSTN-LCD,Visual scope 36x61mm; Full 5 digits,15.2mm High; 7 segment analog bar graph scaled from 0~100% of FS
Backlight: White

• Wireless Communication (ADT680W only)
Wireless Frequency: 2.4G ISM Bands, 20 meter range
Number of wireless Channels : Chanel 1~15
Software: Wireless network demo software for free (download on www.additel.com)

Remark: The Additel 9030 wireless dongle is one of standard accessories for ADT680W

• Data Logging (ADT680W only)
Storage Capacity: 140,000 readings(time, pressure, and temperature)
Storage Interval: Adjustable from 1~9999 Sec

• Compliances
Certificates:CE RTTE, FCC ID, IC ID
Protection Level: IP67
Vibration: 5g(20~2000Hz)
Shock resistance: 100g/11ms

• Others
Dimensions: 100mm x 40mm, total height:157mm
Weight: 500g
Fitting: 1/4NPT male, G1/4 male, M20×1.5 male (< 15,000 psi)

• Auto off:
Disabled,15, 30, 45, 60, 90, 120 Minutes optional.

• Filtering:
Averaging (3 to 10 samples) or low-pass first-order filter.

• Engineering units:
Pa, kPa, MPa, bar, mba, psi, kgf/cm2, mmH2O, mmHg, inH2O, inHg, ozf/in, %, °C, °F.
extend units: inH2O(20°C), inH2O(60°F), mmH2O(20°C), mmH2O(15°C), ftH2O(60°F), ftH2O(4°C)

• Backlight Duration:
Not auto off,15,30,45,60 seconds optional.

• Max/Min data capture:
Saves Max and Min data during pressure measurement.

• Key Lockout:
When the gauge is in auto-storing mode, the front panel buttons will be automatically locked.

• Overpressure Alarm:
Display will flash over 120%FS

• Battery voltage Indicator:
Displays the battery life remaining. When the battery voltage is too low, the gauge will power-off automatically.

• Overpressure Record:
Gauge will record max pressure data when the gauge is over pressured by 120% of FS.

• Leakage test:
In leak test mode, the gauge will record beginning pressure, ending pressure, and show the difference ΔP.

• Factory Reset:
Resets all settings back to factory default, except the calibration parameters.

• Warranty:
1 year

Gauge Pressure
P/N	Pressure Range		Media[2]	Accuracy(%FS)	Burst Pressure
P/N	(psi)[1]	(bar)	Media[2]	Accuracy(%FS)	Burst Pressure
V15	-15	-1.0	G	0.05(0.1, 0.25)	3×
GP15	15	1.0	G, L	0.05(0.1, 0.25)	3×
GP30	30	2.0	G, L	0.05(0.1, 0.25)	3×
GP100	100	7.0	G, L	0.05(0.1, 0.25)	3×
GP300	300	20	G, L	0.05(0.1, 0.25)	3×
GP500	500	35	G, L	0.05(0.1, 0.25)	3×
GP1K	1,000	70	G, L	0.05(0.1, 0.25)	3×
GP3K	3,000	200	G, L	0.05(0.1, 0.25)	3×
GP5K	5,000	350	G, L	0.05(0.1, 0.25)	3×
GP10K	10,000	700	G, L	0.05(0.1, 0.25)	2×
GP15K	15,000	1,000	G, L	0.05(0.1, 0.25)	2×
GP20K	20,000	1,400	G, L	0.05(0.1, 0.25)	1.5×
GP25K	25,000	1,600	G, L	0.1(0.25)	1.5×
GP30K	30,000	2,000	G, L	0.1(0.25)	1.5×
GP36K	36,000	2,500	G, L	0.1(0.25)	1.5×
GP40K	40,000	2,800	G, L	0.1(0.25)	1.1×

Compound Pressure
P/N	Pressure Range		Media[3]	Accuracy(%FS)	Burst Pressure
	(psi)	(bar)
CP15	±15	±1	G,L	0.05(0.1, 0.25)	3×
CP30	15 to 30	-1 to 2	G,L	0.05(0.1, 0.25)	3×

Note: [1]. Sealed gauge pressure for above 1000 psi
[2][3]. G=Gas, L=Liquid (please specify media type when place order)

Pirkti Additel 680 - skaitmeninį slėgio manometrą
Jei turite klausimų dėl įrangos, susisiekite su mumis elektroniniu paštu: This email address is being protected from spambots. You need JavaScript enabled to view it. ARBA telefonu: +370 (5) 210 22 74.
Additel 680 - skaitmeninis slėgio manometras, kaina: ---- eurų