The 912 Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 60psi (4bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.1 Pa (0.001 mbar). The 912 is a very stable low pressure calibrator. It makes use of an isothermal bellows chamber which is designed for reducing the possible effects of environmental temperature change. Most pumps make use of a check valve (non-returning valve) and are not well insulated which will cause large fluctuations in pressure with a change in ambient temperature or when the unit is touched. The 912 does not use a check valve and is remarkably stable. Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 912 is an ideal comparison test pump for low pressure application.

• Portable
Only 6.2 lb (2.8 kg)

• Adjustment Resolution
0.001 psi (10 Pa , 0.1 mbar).
High-quality screw press for fine pressure adjustment.

• Great Stability
Isothermal chamber: the pressure chamber is insulated to reduce the influence from environmental temperature changes
Specially designed bellows minimize leakage to guarantee excellent stability
Shut-off valve closes the air in the isothermal chamber during calibration

• Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from moisture and dirt.

• Easy-to-use
Pressurized to desired pressure by the lever directly and make fine adjustment. No high-pressurized valve needed.

• Hand-tight Quick Connectors
Allows easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.

The Additel 912 Low Pressure Test Pump is designed to generate pressure from 95% vacuum to 60 psi (4.bar) for the application requiring accurate pressure testing and calibration. It can be used in calibrating pressure gauges, transmitters, or other pressure measuring instruments.

• Media:
Air

• Generated Pressure Range
95% vacuum to 60 psi (4 bar) positive pressure

• Adjustment Resolution:
0.001 psi (10 Pa, 0.1 mbar).

• Material
Ram/adapters: SS
Body: SS/aluminum
Seals: Buna-N

• Connection
Hand-tight connectors for both test gauge and reference gauge.
Test Gauge Connection: 1/4NPT female, 1/4BSP female, or M20X1.5 female
Reference Gauge Connection: 1/4NPT female , 1/4BSP female, or M20X1.5 female

• Dimensions
Height: 5.51" (140 mm);
Base: 10.75" (273 mm) x 10.16" (258 mm).

• Weight:
6.2 lb (2.8 kg).

• Warranty:
1 year

Pirkti Additel 912 - pneumatinę slėgio pompą
Jei turite klausimų dėl įrangos, susisiekite su mumis elektroniniu paštu: This email address is being protected from spambots. You need JavaScript enabled to view it. ARBA telefonu: +370 (5) 210 22 74.
Additel 912 - pneumatinė slėgio pompa, kaina: ---- eurų